What is Coronary Stents?
Coronary stents are tubular metallic devices that are
expandable and can be used in the clogged arteries of patients that are
suffering from an underlying atherosclerosis condition. The procedure of
revascularization is also known as the percutaneous coronary intervention or
coronary angioplasty after the introduction of the stent. After the safe
placement of coronary stents, the coronary dissection and the vascular recoil
are eliminated because of the expandable and metallic meshwork of the stent,
which prohibits the negative remodeling. The first coronary stent was designed
in the 1980s, since then it has shown improvement in the shape, structure and material that is used for designing them.
What are Coronary Stents Working?
Coronary stents are the small, wired mesh tubes that allow
the widening of a clogged artery and restoration of adequate blood flow to the
heart. During the procedure, the cardiologist places the stent over a long,
thin tube with a balloon tip called as a catheter and allows the insertion into
the groin area or the arm region. After the stent reaches the clogged artery,
the cardiologist will allow inflation of the balloon for expanding the stent.
After the stent reaches the appropriate size for widening the clogged artery,
the doctor will allow deflation of the balloon and its removal. However, the
stent will be staying in the place permanently for propping open the artery and
for decreasing the chances of narrowing down again.
View @ Coronary Stents Pipeline
How many types of
Coronary Stents Pipeline?
Bare-Metal Stents
Bare metal stents are made of tiny mesh wired tubes, which
allow the widening of the clogged artery but do not have a coating of the
polymer or drugs that helps to avoid re-blockage of the arteries. These types
of stents can be used in patients that are allergic to certain polymers or do
not require drugs that are eluted from the drug eluting stents.
Drug-Eluting Stents
A drug-eluting stent is a bare-metal stent which has a
coating of the polymer and allows the gradual release of the drugs over a
period of time when the re-blocking of the arteries is about to take place. The
drug eluting stents help in order to minimize the chances of the artery
blockage from happening again. There are two subcategories of drug eluting
stents namely:
Permanent Polymer
Drug-Eluting Stent
In this particular type of stent, the polymer is placed onto
the stent permanently even after the release of the entire drug permanently.
Bioresorbable Polymer
Drug-Eluting Stent
In this type of stent, the polymer and the drug coatings are
absorbed fully by the body shortly after the drug has been released fully. This
tends to promote better healing after elimination of the long term polymer
exposure.
What is Coronary
Stents Regulatory?
Coronary stents are placed in class III of product
classification by the U.S. FDA. For class III devices, the sponsor must
implement a Quality Management System (QMS) that meets FDA Quality System
Regulation (QSR). It requires to confirm to the clinical studies. An
Investigational Device Exemption (IDE) must be applied if clinical studies are
required and sponsor should develop clinical trial protocol and conduct study.
Manufacturer must prepare and submit a PMA Premarket Notification application
and pay required fee. FDA issues PMA approval letter and is posted online. At
this time, the sponsor must be in full compliance with QSRs.
Original Source:- Coronary Stents Pipeline
Comments
Post a Comment